When a leaseholder wants to make changes to their apartment, the request can sound relatively straightforward. Remove a wall. Change the layout. Open up a living space.
For an RMC director, however, approving alterations is not always as simple as saying yes or no.
Depending on the terms of the lease and the works being proposed, there may be legal and technical considerations to work through. The appropriate consent needs to be obtained and, where a Licence to Alter is required, the approval should be properly documented.
Ultimately, it is about managing risk for the building and the RMC. So, what should RMC directors check before approving building works?
What is a Licence to Alter?
A lease will typically set out what a leaseholder can and cannot do within their property, including provisions relating to alterations.
Where consent is required for proposed works, a Licence to Alter can provide the formal record of what has been approved. This is important not only while the works are taking place, but also in the future. For example, if a leaseholder later sells their apartment and the layout has changed, they may need to demonstrate that the appropriate consent was obtained.
For RMC directors, having a clear process and proper documentation helps provide certainty around what has, and has not, been authorised.
1. Start with the lease
The first step is also the most important: read the lease.
Before considering whether works should be approved, the relevant lease provisions need to be understood.
Leases can contain specific requirements and restrictions around alterations. The fact that works are taking place wholly inside an apartment does not necessarily mean a leaseholder is free to proceed without consent.
The lease provides the starting point for establishing whether consent is required and how the proposed works should be considered.
2. Understand exactly what is being proposed
A request to “renovate the kitchen” or “make the living space open plan” may not provide enough information to make an informed decision.
There is a significant difference between redecorating an apartment and making a physical alteration to it.
RMC directors should have a clear specification of what the leaseholder intends to do. If walls, chimneys or other elements are being removed or altered, for example, it is important to understand the implications before consent is given.
Being clear about the scope at the beginning can also help avoid questions or complications later in the process.
3. Establish whether structural work is involved
Removing an internal wall is a common example of where an apparently straightforward home improvement can become more complex.
Creating larger, open-plan spaces remains popular, but before a wall is removed, it needs to be established whether structural considerations are involved.
A similar principle applies to alterations such as the removal of a chimney in an older apartment building. What looks like a change to an individual property may have wider implications for the building.
RMC directors are not expected to make those technical judgements themselves. What matters is recognising when specialist input may be necessary and ensuring it forms part of the approval process.
4. Bring in the right expertise
Licence to Alter applications have the potential to involve several different considerations, which is why knowing when to involve other specialists is important.
Depending on the proposed works and circumstances of the building, appropriate technical or legal input may be required before an application can progress.
For RMC directors, the key is having a process that identifies what is required and coordinates the right expertise rather than trying to navigate unfamiliar technical questions alone.
5. Consider additional requirements for higher-risk buildings
Alterations can become more complex where a property sits within a higher-risk building.
In one case managed by Centrick, for example, an application involving the removal of an internal wall in a higher-risk building also required the involvement of the Building Safety Regulator.
It demonstrates an important point for RMC directors: a change inside an individual apartment should not automatically be treated as an isolated piece of work.
The building, nature of the alteration and regulatory requirements all need to be considered.
6. Make sure consent is properly documented
Reaching a decision is only part of the process.
Where a Licence to Alter is required, having the appropriate documentation creates a clear record of what has been approved.
That can be valuable for everyone involved. The RMC has a record of the consent given, while the leaseholder has evidence that the alterations were authorised, including if questions arise when they later decide to sell.
It also avoids future RMC directors having to piece together historic decisions from old conversations or correspondence.
A practical Licence to Alter checklist for RMC directors
When you receive a request for alterations, consider:
- What does the lease say? Check the relevant provisions before approving anything.
- What exactly is changing? Ask for a clear specification of the proposed works.
- Are there structural considerations? Establish whether the proposed alterations require specialist input.
- Does additional expertise need to be involved? Make sure appropriate technical or legal support is obtained where necessary.
- Are there additional requirements for the building? More complex buildings or alterations may introduce further considerations.
- Has the correct consent been obtained? Ensure the appropriate approval process has been followed.
- Has everything been properly documented? Keep a clear record of the works that have been authorised.
For a volunteer RMC director, that can be a considerable amount to coordinate, particularly when alteration requests are only one part of managing a residential development.
Taking the complexity out of Licence to Alter applications
RMC directors do not need to become experts in structural alterations, legal documentation or every other issue that can arise from a leaseholder’s proposed works. They do, however, need confidence that applications are being handled properly, risks are being considered and the relevant expertise is involved when required.
As part of our Building & Estate Management service, Centrick can manage the Licence to Alter process on behalf of RMC clients, helping to coordinate an application from the initial request through to the appropriate consent and documentation.
It means RMC directors can make informed decisions while having experienced support to help navigate the complexity around them.
Looking for a managing partner to support your RMC with Licence to Alter applications and the wider responsibilities of managing your development? Have a chat with our team.